Inverted mode can be operated in conjunction with any of the lock and follow modes.Ī display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.įeaturing a newly-designed quick-release baseplate system, the EC1 is easy to balance without any tools. Switch to inverted mode at any time by simply flipping the handle over the camera. The 3-axis follow mode gives you full control, allowing you to pan, tilt, and roll. In pitch and yaw-axis follow mode, the EC1 will follow your pan and tilt movements. In yaw-axis follow mode, the EC1 will only follow your pan movements. The EC1 features 3 different follow modes. After a few seconds, the camera will lock and hold its position until it is reset back to default. Quickly lock your camera into any position by manually pointing and holding it in any direction. The camera's position will stay the same no matter how you move the handle. In Lock Mode, the Yaw, Pitch, and Roll axes work together to keep the camera fixed and pointed in one direction. Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient handheld stabilizer. The EC1 Beholder features three 360° rotating brushless motors that give you a limitless range of motion along all three axes: yaw, roll, and pitch. These batteries are rechargeable from within the EC1 via an included micro USB adapter, and can also be charged using optional chargers such as the ikan ICH-SC4. The EC1 is supplied with three 18650 batteries that provide up to 3 hours of operating life. It also has a 1/4"-20 threaded mounting hole on the handle for attaching accessories for advanced setups, and a 3/8"-16 threaded mounting hole on the bottom for mounting onto a tripod, monopod, and other support gear. The EC1 is designed with a quick-release baseplate that allows for convenient camera attachment and tool-less balancing. The EC1 also has an OLED display on the rear that confirms the selected mode of operation and provides battery life info. The EC1 also features a lock mode that sets the camera in a fixed position, and a point-and-lock mode that locks the position you hold the camera in for a few seconds. Auto-inversion lets you use the gimbal with dual handle support systems like the ikan DGH. The EC1 offers three follow modes plus an auto-inversion mode that allows for upside down operation. The gimbal employs an adaptive PID algorithm to deliver stable rotation. The EC1 offers unlimited 360° rotation along the yaw, pitch, and roll axes, and features an advanced 32-bit controller and 12-bit encoder system. The ikan EC1 Beholder is a 3-axis handheld gimbal stabilizer for DSLR and mirrorless cameras weighing between 2 - 4.5 lb.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |